ATMOS D 30 P

Product detailed description

- 8.9-29.8 kW ecological, fully automatic pellet boiler only

- is designed for perfect combustion of pellets, with a pellet burner built into the left or right side of the boiler, depending on the customer's needs. The burner fully automatically draws pellets from the fuel tank via a screw conveyor. The fuel tank is usually located next to the boiler or in an adjacent room and can be of any size (standard 250, 500 or 1000L). Often, part of the boiler room is also used as a fuel tank, which is sufficient for the entire heating season.

The operation of the pellet burner itself is fully automatic. When the burner receives a start command or a heating need arises, the conveyor feeds the pellets into the burner nozzle and ignites them with a heating element (spiral). After sufficient heating of the pellets, the burner reaches the set power and remains at that level until the system (house) is heated. The burner then turns off and the pellets in the burner chamber burn out. The burner is thus ready for a new start. The entire cycle is repeated whenever needed.

The boiler power and other burner functions are controlled by an electronic control system, which allows the boiler operation to be adapted to specific system conditions. Pellet replenishment, cleaning of the burner combustion chamber and ash removal are carried out once every 1 – 30 days, depending on the quality of the pellets and the size of the tank.
If required, the boiler can be equipped with an automatic ash removal system for comfortable heating with minimal maintenance.

Required accessories for the boiler:
burner A45	screw conveyor DRA50 - various lengths	pellet tank - various