Ash removal device without additional ash container
Code: S0535Product detailed description
- is intended for pellet boilers Dxx P
As an accessory for each pellet boiler DxxP manufactured after 1.3.2007, it is possible to purchase an automatic ash removal system from the boiler body to an additional external ash container. This automatic ash removal device does not require any special maintenance and increases the comfort of pellet heating.
Ash removal takes place completely automatically using a screw conveyor with a gearbox, which removes ash from the chamber under the burner at regular intervals of 1, 3, 6, 12 or 24 hours, depending on the setting for the specific fuel. Automatic ash removal can also be manually activated if needed by simply turning the switch on the boiler off and on again. The size of the ash container is selected after careful consideration based on the ash content of the fuel.
When the additional ash container is completely full, the ash removal device (screw conveyor) will automatically shut off and the ash removal module will start emitting an audio signal. To restart the operation after cleaning the external ash container (removing it), simply turn the switch on the boiler off and on again for 5 to 10 seconds.
Additional parameters
| Category: | automatic ash removal |
|---|---|
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
![]() |
Atmos is a Czech family company. Almost 100 years of history, progressive development and experience make it The range includes wood gasification boilers from 15 to 150 kW, gasification boilers for brown coal (and wood) |

![]() |
Through the Slovak Innovation and Energy Agency’s national projects Zelená domácnostiam (a Slovak subsidy programme), family houses and apartment buildings will be able to obtain support for installing small systems that use renewable energy sources. The support may only be used for equipment that meets the technical conditions and is registered. Most ATMOS boiler types (marked with the logo) are eligible equipment, and you can apply for a subsidy. More information can be found HERE. |


