System board STIROTERMAL DRY and heat spreader plate UHPS- dry floor system

Technical parameters: 

• for pipe diameter: 16 mm
• pipe spacing: 150, 300 mm
• insulation material: EPS
• board clean area: 0.72 m2
• dimensions: 1200 x 600 x 30 mm
• total thickness: 30 mm
• thermal conductivity coefficient: 0.038 W/(m.K)
• board thermal resistance: 0.71 m2 K/W
• compressive strength (10% compression): 150 kPa
• thermal dimensional stability: 80 “C
• maximum load: 2400 kg/m2
• fire classification EN 13501-1: E
• fire classification DIN 4102: 815,77
• country of origin: EU

Technical parameters: 

• for pipe diameter: 16 mm
• material: aluminium
• sheet dimensions:
  1000 x 120 x 0.40 mm
• possibility of length adjustment - notches every approx. 33 cm 
• consumption of spreading sheets:
  approx. 70% of the pipe length

Attention!!! In the case of ordering system board in quantity less than 1 package /11.52m2/
an additional handling fee of 15€ including VAT will be added to the transport.

- for floating floor á = 150 mm > 6.7 mb/m2
- for vinyl / ceramic surface á = 300 mm > 3.3 mb/m2

Example of dry system installation, with preparation for the walking layer - floating floor: 

Materials for correct placement and installation of dry system under the walking layer: 

1 Rigidur floor panel 

2 Rigidur floor adhesive 

3 Rigidur screws 

4 base layer, Rigidur levelling underlay 

5 edge expansion strip