ATMOS D 25 P COM

Product detailed description

- 7-24 kW ecological, fully automatic pellet boiler   

- ATMOS D25P COM  is delivered as a complete unit with stainless steel connections ( boiler circuit with a 70°C thermostat valve + one pump group with a 3-way valve without a servo motor ) and with the ATMOS A25 pellet burner.

- the boiler is designed for perfect combustion of pellets, with a pellet burner built into the left or right side of the boiler, according to the customer's needs. The pellet burner fully automatically draws pellets from the fuel tank using a screw conveyor. The fuel tank is usually placed next to the boiler or in an adjacent room and can be of any size (standard 250, 500 or 1000L). Often, part of the boiler room is used as a fuel tank, which is sufficient for the entire heating season.
Operation of the pellet burner runs completely automatically. If the burner receives a start command or if there is a need to heat, the conveyor feeds the pellets into the burner nozzle and ignites them with a heating element (spiral). After sufficient heating of the pellets, the burner reaches the set power and remains at that level until the system (house) is heated. Then the burner turns off and the pellets in the burner chamber burn out. The burner is thus ready for a new start. The whole cycle is repeated whenever necessary.
The boiler power and other burner functions are controlled by an electronic control system, which allows the boiler operation to be adapted to specific system conditions. Refilling of pellets, cleaning of the burner combustion chamber and removal of ash are performed once every 1 – 30 days, depending on the quality of the pellets and the size of the tank.
If necessary, the boiler can be equipped with an automatic ash removal system for comfortable heating with minimal maintenance.

Required accessories for the boiler:
screw conveyor DA  - various lengths	pellet tank - various