Auger conveyor ATMOS DA for burner A25
Code: H0151Related products
Product detailed description
- variants with lengths from 1500 to 4000 mm
For the burner ATMOS A 25, belt conveyors DA are available in lengths from 1.5 m to 4 m. The conveyors are equipped with a motor and gearbox. A support leg is delivered with each conveyor. The length of the leg is adjusted so that the angle of the conveyor is maximum 45° and the hose is taut. In confined spaces, we recommend replacing the leg with a chain (part of the conveyor delivery), to which the conveyor is suspended from the ceiling.
The length of the conveyor must be selected so that the hose between the burner and the conveyor is taut and has a minimum length of 20 cm (optimally 30 – 60 cm) for safety reasons. The maximum hose length should not exceed 1 m.
| - length 1500 mm, diameter 75 mm (gearbox 25 W): | ||
| - is intended only for boilers where the burner is built into the side of the boiler: | ||
| D 14 P | C 18 SP | DC 18 SP |
| D 21 P | C 25 SP | DC 25 SP |
| D 25 P | DC 30 SPX | |
| D 20 P | DC 32 SP | |
| Note: not suitable for combined boilers with modification for pellet burners. | ||
| - length 2000 mm/2500 mm/3000 mm/4000 mm, diameter 75 mm (gearbox 25 W) | |||
| - is intended for boilers: | |||
| D 14 P | C 18 S upr | DC 18 SP | DC 18 S upr |
| D 21 P | C 25 ST upr | DC 25 SP | DC 25 S upr |
| D 25 P | C 32 ST upr | DC 30 SPX | DC 30 SX upr |
| D 20 P | AC 25 S upr | DC 32 SP | DC 32 S upr |
| C 18 SP | |||
| C 25 SP | |||
The conveyor is delivered separately, but is an inseparable part of the pellet burner system A 25.
Additional parameters
| Category: | burners and feed augers |
|---|---|
| Warranty: | 2 years |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
 |
Atmos is a Czech family company. Almost 100 years of history, progressive development and experience make it The range includes wood gasification boilers from 15 to 150 kW, gasification boilers for brown coal (and wood) |
 |
Through the Slovak Innovation and Energy Agency’s national projects Zelená domácnostiam (a Slovak subsidy programme), family houses and apartment buildings will be able to obtain support for installing small systems that use renewable energy sources. The support may only be used for equipment that meets the technical conditions and is registered. Most ATMOS boiler types (marked with the logo) are eligible equipment, and you can apply for a subsidy. More information can be found HERE. |