Protherm PANDA
Code: 0010022582Related products
Product detailed description
- mini 19kW and 24kW Low NOx technology, no need to connect to the electrical grid, flue gas exhaust to chimney
- High efficiency of hot water preparation
- Comfortable hot water preparation even at low flow rates and low water pressure
- Complies with the requirements of the EU directive on energy efficiency ErP
- No electrical power supply required
- Status indication by one multifunctional LED
- Smooth manual setting of power and temperature
- Energy saving due to a wider burner power modulation range (35 - 100%)
- Panda IOG is available in two power versions 19kW and 24kW with flue gas exhaust to chimney
- Compact dimensions and low installation space requirements
- The flow heater is equipped with a flue gas leak sensor, electronic ignition, and powered by one battery (mono LR20 cell). With an average of 20 draws per day, battery life is 1 year.
- Easy installation, can be installed in the bathroom above the bathtub or sink
| Technical parameters: | IOG mini 19 | IOG 24 |
| Hot water heating | ||
| Fuel | natural gas / propane | |
| Min./Max. thermal power [kW] | 6.4 / 18.1 | 8.3 / 23.1 |
| Maximum gas consumption [m3/h] | 2.3 | 2.9 |
| Min./Max. hot water temperature [°C] | 25/65 | 25/65 |
| Hot water flow rate [l/min] | 2.6 - 5.5 | 3.4 - 7.0 |
| Warm water flow rate [l/min] | 5.4 - 11.0 | 6.5 - 14.0 |
| Min./Max. inlet pressure for hot water [kPa] | 16/1300 | 22/1300 |
| Min. flow pressure for hot water [kPa] | 16/1300 | 22/1300 |
| Min. flow rate for hot water [l/min] | 2.2 | 3 |
| Energy efficiency class for hot water preparation | A | A |
| Flue gas exhaust | ||
| Flue gas exhaust method | to chimney | to chimney |
| Minimum diameter of flue duct ø | 110 | 125 |
| Flue gas temperature at min./max. power [°C] | 105/200 | 90/185 |
| NOx emission level - natural gas [mg/kWh] | ≤56 | ≤56 |
| NOx emission level - propane [mg/kWh] | ≤72 | ≤72 |
| Maximum mass flow rate of flue gases [g/s] | 6.4 | 10.5 |
| Electrical parameters | ||
| Battery power supply [V] | 1.5 V (LR20) | 1.5 V (LR20) |
| Battery life (20 draws per day) | 1 year | 1 year |
| Dimensions and weight | ||
| Width/Height/Depth [mm] | 310 / 580 / 255 | 350 / 680 / 270 |
| Weight without water [kg] | 9.6 | 12.2 |
Additional parameters
| Category: | instantaneous water heater |
|---|---|
| Warranty: | 2 years |
| Extended warranty: | Boiler warranty can be extended up to 5 years – details and a simple procedure here: https://lnk.sk/tcvx |
-
navod-na-obsluhu-panda-iog-1547293.pdf - (649 kB) Operating instructions Panda IOG
-
prospekt-prietokovy-ohrievac-panda-iog-ptp-web-1420432.pdf - (704 kB) Brochure – Panda IOG _ PTP instantaneous water heater
-
pripojovacie-rozmery-panda-iog-1459685.pdf - (199 kB) Pripojovacie rozmery Panda IOG
-
Zarucne podmienky Protherm
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
Protherm Production manufactures a wide range of boilers and water heating appliances. These include wall-hung and floor-standing condensing boilers, electric boilers, electric water heaters and indoor units for heat pumps. The plant in Skalica makes products of the following brands:
Production in the refurbished premises of the company’s current headquarters dates back to 2000, when three production lines turned out 51,000 finished products a year. Over time, production grew steadily to its present scale. New projects were added and new production lines were built. Today the Skalica plant makes more than 710,000 products a year. The wide range of appliances is manufactured for countries in Europe, Asia and Africa. The largest export markets are Germany, Russia, Belgium, Turkey and Italy.
Protherm Production uses state-of-the-art electronic work procedures, thanks to which heating appliances are relatively easy to assemble on the lines. Work instructions on LCD screens guide employees through the entire assembly process in both text and pictures. This intelligent electronic system makes production easier and helps to avoid mistakes. If the wrong component is used, it alerts us and stops assembly of the product on the line.
The production halls of the Skalica plant are bright, clean and quiet. Protherm Production aims to become a green manufacturer, which is why it invests considerable funds in environmentally friendly solutions and innovation and focuses on saving energy.
