Manual contact thermostat P5681
Code: 2101103000Related products
Product detailed description
Clamp-on thermostat for 230V pump, 0 - 90 °C, without capillary.
It is used to switch on or off any contact, most commonly an electrical contact (pump phase).
And thus turns on or off the circulation.
This allows the pump to easily regulate, for example, a boiler circuit of a solid fuel boiler, or heating of an accumulator tank, or a water heater for hot water (TUV).
The thermostat can be simply clamped onto the pipe and on the other side it is clamped in place, so that it does not loosen.
The clamp-on thermostat contains a bimetal, which activates the contact for switching on or off by its bending.
- protective clamp-on thermostat with spring for fixing on a pipe or on a manifold
- possibility of connection as switching on or switching off thermostat
- voltage 230 V AC 50Hz, 400 V AC 50Hz
- temperature range: 0-90 °C
- temperature differential: 5 °C
- protection class: IP 20
- rate of temperature change: < 10 °C/min
- maximum regulated temperature: 85 °C
- storage temperature: -15 °C to 60 °C
- switching current: 16A- 230V, 6A- 400V
- dimensions: 38 x 54 x 105 mm
The bimetallic contact thermostat is used for regulation depending on the temperature of the heating medium in the pipes on which it is mounted.
Mounting is possible on pipes up to a maximum diameter of 2" using a spring steel clamp, which ensures contact between the thermostat and the pipe.
Additional parameters
| Category: | controllers for pumps and boiler rooms |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.3 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!