Room unit for ACD03, ACD04 WiFi

Product detailed description

Room unit ARU 5 WiFi, ARU 10 WiFi and ARU 30 WiFi for thermostatic control ACD03, ACD04.

- operates based on serial communication (it is not a conventional room thermostat). It measures the temperature in the room where it is installed.

ARU5 WiFi - temperature sensor /probe/ - is used for measuring room temperature so that the electronic control can optimize heating (water temperature) for the respective heating circuit.

ARU10 WiFi - without display - is intended for simple control of the heating circuit, it informs about set modes and is used for measuring room temperature and humidity, allowing the electronic control to optimize heating of the building (water temperature for the respective heating circuit). Using a rotary wheel, it allows adjustment of the desired room temperature, and a switching button allows changing the mode (operation).
ARU30 WiFi - touch display - is intended for intuitive control of the heating circuit, it informs about set modes and parameters, and is used for measuring room temperature and humidity. Using the touch display, it allows changing the desired room temperature depending on the time, changing modes using pre-set functions, and communicating with the ACD03/04 control. It also allows the electronic control to optimize heating of the building (water temperature for the respective heating circuit).
Note: To connect a second or third room unit ARU30, it is necessary to purchase a 12 V power supply DE06-12 or MEAN WELL GS06E-3P1J.

- wall-mounted units must be installed at a height of 1.2 to 1.5 m in a neutral location, i.e., a reference location for all rooms - the heating circuit. A suitable location for installation would be an internal partition wall in the coldest room used for daytime activities.