EUROSTER 11 Z - programmable thermostat for 2 pump circuits
Code: EUROSTER 11 ZProduct detailed description
Euroster 11 Z, thermostat for heating systems with two circuits and pumps (DHW and CH).
Euroster 11 Z is a programmable controller with the AntiStop function and the overheat protection function.
It is a modern microprocessor controller for the control of systems with a heating circulation pump and a circulation pump for hot domestic water (DHW) heating.
The thermostat has two controllers independently controlling the DHW pump and the central heating pump.
Euroster 11 Z is a cost-effective solution when it is necessary to use separate pumps in independent systems - central heating / DHW.
The device gives priority to DHW heating.
If the water temperature in the heating circuit (boiler outlet) drops below the desired value, the device turns off the heating circulation pump and turns on the DHW tank circulation pump, if the tank temperature drops below the desired value.
At the same time, it protects the tank from cooling and turns off the DHW pump when the boiler water temperature is too low.
Standardly, the device gives priority to DHW tank heating over heating (this function can be turned off, however).
Outside the heating season, the built-in device processor starts the pump or valve for 30 seconds every 14 days.
Other advantages of the device EUROSTER 11 Z:
- adjustable hysteresis
- clear LCD display - backlit
- possibility of temperature sensor calibration
- possibility of manual pump / blower switching
Technical specifications:
- intended for: central heating pump, DHW pump
- power supply: 230 V 50 Hz
- rated output load: 3 A 230 V 50 Hz
- rated power consumption: 1.6 W
- temperature measurement range: + 0 °C ... + 110 °C
- temperature control range: central heating: + 20 °C ... + 80 °C, DHW: + 20 °C ... + 70 °C
- temperature control accuracy: 1 °C
- temperature control hysteresis: 2 °C - 10 °C
- status display: backlit LCD display
- operating temperature range: + 5 °C ... + 40 °C
- storage temperature range: 0 °C ... + 65 °C
- IP rating: IP 40
- color: black
- mounting: wall-mounted
- weight (controller with cables): 0.72 kg
- certificates / standards: complies with EMC and LVD directives
- dimensions (WxHxD) mm: 150/90/52
Packaging includes:
- controller Euroster 11 Z, screws, instructions, sensor, mounting template
Additional parameters
| Category: | controllers for pumps and boiler rooms |
|---|---|
| Warranty: | 2 years |
| Weight: | 0.8 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!