DHW cylinder Protherm FE 200 BM (floor-standing)
Code: 0010015965Product detailed description
- Indirectly heated tank with a spiral tubular heat exchanger
- Net volume of the tank 184 liters
- Steel tank with high-quality enamel
- Stationary version with adjustable feet for uneven surfaces
- Protection against corrosion magnesium anode
- Easy connection of the recirculation circuit
- Easy water draining from the tank via a built-in drain valve
- Improved cold water stratification at the bottom of the tank thanks to a new cold water inlet diffuser design
- Minimal heat losses thanks to a new type of PUR rigid foam insulation (energy class "B")
| Technical parameters: | B 60 Z | ||
| Energy class for hot water preparation | B | ||
| Volume of usable water [l] | 184 | ||
| Max. operating pressure [bar] | 10 | ||
| Max. water temperature [°C] | 85 | ||
| Max. heating water inlet temperature [°C] | 110 | ||
| Connection W | R 1" | ||
| Connection of usable water | R 3/4" | ||
| Recirculation connection | R 3/4" | ||
| Drain valve and plug | G 1" | ||
| Thermal power [kW] | 43,2 | ||
| Hourly flow rate [l] | 829 | ||
| Amount in 10 min. [l] | 279 | ||
| Energy losses in standby mode [kW/d] | 1,4 | ||
| Heating surface of the heat exchanger [m2] | 1 | ||
| Heating water content in the heat exchanger [l] | 6,8 | ||
| Pressure loss in the heat exchanger at max. heating water consumption [mbar] | 22 | ||
| Flow rate of heating water [l/h] | 1400 | ||
| Continuous performance of hot water at heating water temperature 85/65°C [kW] | 43 | ||
| Dimensions | |||
| Height / Diameter [mm] | 1174 / 590 | ||
| Weight with operating fill [kg] | 281 | ||
| Weight without water [kg] | 97 | ||
Additional parameters
| Category: | hot water cylinders |
|---|---|
| Warranty: | 2 years |
| Weight: | 79.2 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
Protherm Production manufactures a wide range of boilers and water heating appliances. These include wall-hung and floor-standing condensing boilers, electric boilers, electric water heaters and indoor units for heat pumps. The plant in Skalica makes products of the following brands:
Production in the refurbished premises of the company’s current headquarters dates back to 2000, when three production lines turned out 51,000 finished products a year. Over time, production grew steadily to its present scale. New projects were added and new production lines were built. Today the Skalica plant makes more than 710,000 products a year. The wide range of appliances is manufactured for countries in Europe, Asia and Africa. The largest export markets are Germany, Russia, Belgium, Turkey and Italy.
Protherm Production uses state-of-the-art electronic work procedures, thanks to which heating appliances are relatively easy to assemble on the lines. Work instructions on LCD screens guide employees through the entire assembly process in both text and pictures. This intelligent electronic system makes production easier and helps to avoid mistakes. If the wrong component is used, it alerts us and stops assembly of the product on the line.
The production halls of the Skalica plant are bright, clean and quiet. Protherm Production aims to become a green manufacturer, which is why it invests considerable funds in environmentally friendly solutions and innovation and focuses on saving energy.
