Backup power supply Avansa 1050 W

• maximum capacity: 1500 VA
• maximum rated power: 1050 W
• main input power: 150 – 270 VAC
• input frequency: 45 – 65 Hz
• output power: 207 – 241 VAC
• input frequency: 50 – 60 Hz
• switching time: <4ms
• battery capacity: 12V DC
• overload protection: 110% 130% (30 seconds)
• consumption in idle mode: 22W
• dimensions (H/W/D): 18.5x14.5x34 cm
• the backup power supply is suitable for devices with a maximum power of approx. 500 W in total

This product belongs to the group of professional automatic backup power supplies (UPS) specially designed and manufactured for uninterrupted power supply of solid fuel boilers in the event of a power failure. In the event of a power failure, the backup power supply (UPS) provides immediate energy from the battery, so that the circulation pump remains running and the boiler is safely cooled.

• The backup power supply (UPS) stops in the case of a discharged battery. If the battery is discharged to a value of 10.8V, the backup power supply disconnects the power supply to prevent battery damage. A rapid sound alarm signals: - Overload protection: In the case that the load of the backup power supply (UPS) exceeds 110% of the rated power, the backup power supply (UPS) stops to prevent damage.
• Short-circuit protection: The backup power supply (UPS) stops in the case of a short circuit. – Voltage regulator (AVR) ensures constant voltage for devices within the given range. Battery activation: the system switches to the battery and provides uninterrupted power supply for the device. – Bypass function:
• Automation: if the power supply in the grid is non-standard, the backup power supply automatically switches to the battery. – Conversion for task start-up: in some cases, a higher starting power is required than the rated power of the backup power supply (UPS). In this case, the backup power supply (UPS) solves this problem by supplying 110% of its capacity. After delivering the capacity, it turns off.
• High charging current: the initial charging current is about 10A. Charges the battery in a shorter time than standard chargers.
• Keeping the battery in standby mode: after the battery is fully charged, the backup power supply (UPS) keeps the battery charged. To achieve optimal results, the battery must have a capacity in the range of values: 40 Ah -190 Ah. Do not use a battery with a capacity less than 40Ah, as the initial charging current of the backup power supply (UPS) (up to 10A) may reduce the battery life.